개발자를 위한 API 참조 v3

시작하기

시스템에서 요청을 처리하려면 API 키가 필요합니다. 사용자가 등록하면 해당 사용자에 대한 API 키가 자동으로 생성됩니다. API 키는 각 요청과 함께 전송되어야 합니다(아래 전체 예 참조). API 키가 전송되지 않거나 만료된 경우 오류가 발생합니다. 악용을 방지하기 위해 API 키를 비밀로 유지하십시오.

입증

API 시스템으로 인증하려면 각 요청과 함께 인증 토큰으로 API 키를 보내야 합니다. 아래에서 샘플 코드를 볼 수 있습니다.

curl --location --request POST 'https://ir.cx/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \ 
$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
    "Authorization: Bearer YOURAPIKEY",
    "Content-Type: application/json",
    ),
));

$response = curl_exec($curl);
속도 제한

API에는 안정성을 극대화하기 위해 급증하는 요청으로부터 보호하는 속도 제한기가 있습니다. 속도 제한기는 현재 1분당 30개의 요청으로 제한됩니다.

여러 헤더가 응답과 함께 전송되며 요청에 대한 다양한 정보를 확인하기 위해 검사할 수 있습니다.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
응답 처리

모든 API 응답은 기본적으로 JSON 형식으로 반환됩니다. 이것을 사용 가능한 데이터로 변환하려면 언어에 따라 적절한 기능을 사용해야 합니다. PHP에서는 json_decode() 함수를 사용하여 데이터를 객체(기본값) 또는 배열(두 번째 매개변수를 true로 설정)로 변환할 수 있습니다. 오류가 있었는지 여부에 대한 정보를 제공하는 오류 키를 확인하는 것이 매우 중요합니다. 헤더 코드도 확인할 수 있습니다.

{
    "error": 1,
    "message": "An error ocurred"
}

CTA 오버레이

List CTA Overlays
GET https://ir.cx/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

모수설명
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://ir.cx/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

QR 코드

List QR codes
GET https://ir.cx/api/qr?limit=2&page=1

API를 통해 QR 코드를 얻으려면 이 끝점을 사용할 수 있습니다. 데이터를 필터링할 수도 있습니다(자세한 내용은 표 참조).

모수설명
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://ir.cx/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/ir.cx\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/ir.cx\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}
단일 QR 코드 받기
GET https://ir.cx/api/qr/:id

API를 통해 단일 QR 코드에 대한 세부 정보를 얻으려면 이 끝점을 사용할 수 있습니다.

curl --location --request GET 'https://ir.cx/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/ir.cx\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}
QR 코드 생성
POST https://ir.cx/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

모수설명
type (required) text | vcard | link | email | phone | sms | wifi
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request POST 'https://ir.cx/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "id": 3,
    "link": "https:\/\/ir.cx\/qr\/a58f79"
}
Update QR Code
PUT https://ir.cx/api/qr/:id/update

QR 코드를 업데이트하려면 PUT 요청을 통해 유효한 데이터를 JSON으로 보내야 합니다. 데이터는 아래와 같이 요청의 원시 본문으로 전송되어야 합니다. 아래 예는 보낼 수 있는 모든 매개변수를 보여주지만 모두 보낼 필요는 없습니다(자세한 내용은 표 참조).

모수설명
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request PUT 'https://ir.cx/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "QR has been updated successfully."
}
QR 코드 삭제
DELETE https://ir.cx/api/qr/:id/delete

QR 코드를 삭제하려면 DELETE 요청을 보내야 합니다.

curl --location --request DELETE 'https://ir.cx/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

계정

계정 가져오기
GET https://ir.cx/api/account

계정에 대한 정보를 얻기 위해 이 끝점에 요청을 보내면 계정에 대한 데이터가 반환됩니다.

curl --location --request GET 'https://ir.cx/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "data": {
        "id": 1,
        "email": "[email protected]",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}
계정 업데이트
PUT https://ir.cx/api/account/update

계정에 대한 정보를 업데이트하기 위해 이 끝점에 요청을 보내면 계정의 데이터가 업데이트됩니다.

curl --location --request PUT 'https://ir.cx/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "[email protected]",
    "password": "newpassword"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'email' => '[email protected]',
  'password' => 'newpassword',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "Account has been successfully updated."
}

브랜드 도메인

List Branded Domains
GET https://ir.cx/api/domains?limit=2&page=1

To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).

모수설명
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://ir.cx/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}
Create a Branded Domain
POST https://ir.cx/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

모수설명
domain (required) Branded domain including http or https
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request POST 'https://ir.cx/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'domain' => 'https://domain1.com',
  'redirectroot' => 'https://rootdomain.com',
  'redirect404' => 'https://rootdomain.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "id": 1
}
도메인 업데이트
PUT https://ir.cx/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

모수설명
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request PUT 'https://ir.cx/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'redirectroot' => 'https://rootdomain-new.com',
  'redirect404' => 'https://rootdomain-new.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "Domain has been updated successfully."
}
Delete Domain
DELETE https://ir.cx/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

curl --location --request DELETE 'https://ir.cx/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

연결


채널

List Channels
GET https://ir.cx/api/channels?limit=2&page=1

To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).

모수설명
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://ir.cx/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/channels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "channels": [
            {
                "id": 1,
                "name": "Channel 1",
                "description": "Description of channel 1",
                "color": "#000000",
                "starred": true
            },
            {
                "id": 2,
                "name": "Channel 2",
                "description": "Description of channel 2",
                "color": "#FF0000",
                "starred": false
            }
        ]
    }
}
List Channel Items
GET https://ir.cx/api/channel/:id?limit=1&page=1

To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).

모수설명
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://ir.cx/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/channel/:id?limit=1&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "items": [
            {
                "type": "links",
                "id": 1,
                "title": "My Sample Link",
                "preview": "https:\/\/google.com",
                "link": "https:\/\/ir.cx\/google",
                "date": "2022-05-12"
            },
            {
                "type": "bio",
                "id": 1,
                "title": "My Sample Bio",
                "preview": "https:\/\/ir.cx\/mybio",
                "link": "https:\/\/ir.cx\/mybio",
                "date": "2022-06-01"
            }
        ]
    }
}
채널 만들기
POST https://ir.cx/api/channel/add

A channel can be added using this endpoint.

모수설명
name (required) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request POST 'https://ir.cx/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/channel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Channel',
  'description' => 'my new channel',
  'color' => '#000000',
  'starred' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "id": 3,
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}
Assign an Item to a Channel
POST https://ir.cx/api/channel/:channelid/assign/:type/:itemid

An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.

모수설명
:channelid (required) Channel ID
:type (required) links or bio or qr
:itemid (required) Item ID
curl --location --request POST 'https://ir.cx/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/channel/:channelid/assign/:type/:itemid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "Item successfully added to the channel."
}
채널 업데이트
PUT https://ir.cx/api/channel/:id/update

To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

모수설명
name (optional) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request PUT 'https://ir.cx/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/channel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Acme Corp',
  'description' => 'channel for items for Acme Corp',
  'color' => '#FFFFFF',
  'starred' => false,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "Channel has been updated successfully."
}
Delete Channel
DELETE https://ir.cx/api/channel/:id/delete

To delete a channel, you need to send a DELETE request. All items will be unassigned as well.

curl --location --request DELETE 'https://ir.cx/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/channel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "Channel has been deleted successfully."
}

캠페인

List Campaigns
GET https://ir.cx/api/campaigns?limit=2&page=1

To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).

모수설명
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://ir.cx/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/campaigns?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "campaigns": [
            {
                "id": 1,
                "name": "Sample Campaign",
                "public": false,
                "rotator": false,
                "list": "https:\/\/domain.com\/u\/admin\/list-1"
            },
            {
                "id": 2,
                "domain": "Facebook Campaign",
                "public": true,
                "rotator": "https:\/\/domain.com\/r\/test",
                "list": "https:\/\/domain.com\/u\/admin\/test-2"
            }
        ]
    }
}
캠페인 만들기
POST https://ir.cx/api/campaign/add

A campaign can be added using this endpoint.

모수설명
name (optional) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request POST 'https://ir.cx/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/campaign/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Campaign',
  'slug' => 'new-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "id": 3,
    "domain": "New Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/new-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}
POST https://ir.cx/api/campaign/:campaignid/assign/:linkid

A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.

curl --location --request POST 'https://ir.cx/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/campaign/:campaignid/assign/:linkid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "Link successfully added to the campaign."
}
업데이트 캠페인
PUT https://ir.cx/api/campaign/:id/update

To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

모수설명
name (required) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request PUT 'https://ir.cx/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/campaign/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Twitter Campaign',
  'slug' => 'twitter-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "id": 3,
    "domain": "Twitter Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/twitter-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}
Delete Campaign
DELETE https://ir.cx/api/campaign/:id/delete

To delete a campaign, you need to send a DELETE request.

curl --location --request DELETE 'https://ir.cx/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/campaign/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "Campaign has been deleted successfully."
}

커스텀 스플래쉬

List Custom Splash
GET https://ir.cx/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

모수설명
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://ir.cx/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

픽셀

List Pixels
GET https://ir.cx/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

모수설명
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://ir.cx/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}
Create a Pixel
POST https://ir.cx/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

모수설명
type (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok
name (required) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request POST 'https://ir.cx/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'gtmpixel',
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "id": 1
}
픽셀 업데이트
PUT https://ir.cx/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

모수설명
name (optional) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request PUT 'https://ir.cx/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "Pixel has been updated successfully."
}
Delete Pixel
DELETE https://ir.cx/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

curl --location --request DELETE 'https://ir.cx/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

계획

이 끝점은 관리자 권한이 있는 사용자만 액세스할 수 있습니다.

List Plans
GET https://ir.cx/api/plans

플랫폼의 모든 계획 목록을 가져옵니다.

curl --location --request GET 'https://ir.cx/api/plans' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/plans",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "data": [
        {
            "id": 2,
            "name": "Business",
            "free": false,
            "prices": {
                "monthly": 9.99,
                "yearly": 99.99,
                "lifetime": 999.99
            },
            "limits": {
                "links": 100,
                "clicks": 100000,
                "retention": 60,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "1",
                    "count": "5"
                },
                "overlay": {
                    "enabled": "1",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "1",
                    "count": "10"
                },
                "domain": {
                    "enabled": "1",
                    "count": "1"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "1"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        },
        {
            "id": 1,
            "name": "Starter",
            "free": true,
            "prices": null,
            "limits": {
                "links": 10,
                "clicks": 1000,
                "retention": 7,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "0",
                    "count": "0"
                },
                "overlay": {
                    "enabled": "0",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "0",
                    "count": "10"
                },
                "domain": {
                    "enabled": "0",
                    "count": "0"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "0"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        }
    ]
}
Subscribe a User to a Plan
PUT https://ir.cx/api/plan/:planid/user/:userid

계획에 사용자를 등록하려면 계획 ID 및 사용자 ID와 함께 이 끝점에 PUT 요청을 보냅니다. 구독 유형과 만료 날짜를 지정해야 합니다. 유통기한을 지정하지 않은 경우 종류에 따라 유통기한이 조정됩니다.

모수설명
type monthly | yearly | lifetime
expiration (선택 사항) 계획 만료 날짜 예:2024-08-17 22:32:23
curl --location --request PUT 'https://ir.cx/api/plan/:planid/user/:userid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "monthly",
    "expiration": "2024-08-17 22:32:23"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/plan/:planid/user/:userid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'monthly',
  'expiration' => '2024-08-17 22:32:23',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "User has been subscribed to this plan."
}

사용자

이 끝점은 관리자 권한이 있는 사용자만 액세스할 수 있습니다.

List Users
GET https://ir.cx/api/users?filter=free

플랫폼의 모든 사용자 목록을 가져옵니다. URL에 필터 매개변수를 전송하여 데이터를 필터링할 수 있습니다.

모수설명
filter admin | free | pro
email Search a user by email
curl --location --request GET 'https://ir.cx/api/users?filter=free' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/users?filter=free",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "data": [
        {
            "id": 2,
            "email": "[email protected]",
            "username": "sample2user",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
            "status": "free",
            "planid": 1,
            "expires": null,
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        },
        {
            "id": 1,
            "email": "[email protected]",
            "username": "sampleuser",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar.png",
            "status": "pro",
            "planid": 2,
            "expires": "2022-11-15 15:00:00",
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        }
    ]
}
List a Single User
GET https://ir.cx/api/user/:id

Get data for a single user.

curl --location --request GET 'https://ir.cx/api/user/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/user/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "data": {
        "id": 2,
        "email": "[email protected]",
        "username": "sample2user",
        "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
        "status": "free",
        "planid": 1,
        "expires": null,
        "registered": "2020-11-10 18:01:43",
        "apikey": "ABC123DEF456"
    }
}
Create User
POST https://ir.cx/api/user/add

사용자를 생성하려면 이 엔드포인트를 사용하고 다음 정보를 JSON으로 전송합니다.

모수설명
username (required) User's username. Needs to be valid.
email (required) User's email. Needs to be valid.
password (required) User's password. Minimum 5 characters.
planid (optional) Premium plan. This can be found in the admin panel.
expiration (optional) Membership expiration example 2020-12-26 12:00:00
curl --location --request POST 'https://ir.cx/api/user/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "username": "user",
    "password": "1234567891011",
    "email": "[email protected]",
    "planid": 1,
    "expiration": "2020-11-20 11:00:00"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/user/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'username' => 'user',
  'password' => '1234567891011',
  'email' => '[email protected]',
  'planid' => 1,
  'expiration' => '2020-11-20 11:00:00',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "User has been registered.",
    "data": {
        "id": 3,
        "email": "[email protected]",
        "username": "user"
    }
}
Delete User
DELETE https://ir.cx/api/user/:id/delete

사용자를 삭제하려면 이 엔드포인트를 사용하십시오.

curl --location --request DELETE 'https://ir.cx/api/user/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/user/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "message": "User has been deleted."
}
Login User
GET https://ir.cx/api/user/login/:id

This endpoint will generate a unique link that will allow the user to automatically login to the platform. SSO login urls are valid for 1 hour and they can be used a single time.

curl --location --request GET 'https://ir.cx/api/user/login/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://ir.cx/api/user/login/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
서버 응답
{
    "error": 0,
    "url": "https:\/\/ir.cx\/user\/login\/sso\/vqkyarrmvzbskygjuszmmglsievltssm"
}